Showing posts with label Tut. Show all posts
Showing posts with label Tut. Show all posts
9.21.2012
9.16.2012
9.08.2012
8.30.2012
8.29.2012
8.27.2012
7.29.2012
Tut: Sex on the Beach
This tutorial was written by me on July 29th, 2012, and is entirely my own work. Any resemblance to other tutorials or designs is purely coincidental. This tutorial is done in PSP x4 but may be done in other versions as well. A basic understanding of PSP and its tools are needed.
Supplies:
I am using a beautiful scrap kit by Tasha's Playground called Golden Summer. I purchased it from The PSP Project, here.
Tube is called He's Mine by Irene Owens, which can be purchased here. You need a license to use this artwork.
Font of choice is Dreamed About You, here.
Start off by opening a new image 700 X 700. The bigger it is the better to show detail =)
Open up the porthole and center on your transparent background.
Next place your tube behind the porthole to give the illusion of looking through the glass, erase any part from around the porthole that is sticking out beyond the edges.
Open & c/p flowers to the bottom right of the porthole, drop shadow 5,5.
C/p net and place behind tube, position to the right, drop shadow 5,5.
Grab clouds, position to the top left behind everything, duplicate layer, flip horizontal, and place copy a liitle lower to the right. Drop shadow 5,5.
Open paper 1, position behind everything, load mask of choice to get the desired effect. I'm using WSL_Mask119 with these settings:
C/p log to the bottom of the porthole behind flowers, drop shadow 5,5.
Open pole, place on right side of porthole.
C/p ribbon at the bottom of the porthole in front of the log, drop shadow 5,5.
Open scatter, position to left side of frame behind your tube, erase any part of the scatter that shows through the porthole.
C/p sand behind scatter.
Open shell3 & starfish2, place to the bottom left of porthole, add drop shadow 5,5 to each.
C/p swirl along the ribbon behind shell & strafish.
Open starfish1, flip horizontal, position to the left side of the frame.
Open paper4, layer-send to bottom, load mask of choice. I'm using WSL_Mask117, with the same setting as above.
C/p summer wordart at the bottom of the porthole.
Don't forget your copyright info. Add your name & your done!
Thanks for trying my tut =)
5.30.2012
Tut: Misunderstood
This tutorial was written by me on May 30th 2012, and is entirely my own work. Any resemblance to other tutorials or designs is purely coincidental. This tutorial is done in PSP x4 but may be done in other versions as well. A basic understanding of PSP and its tools are needed.
Supplies:
Tube of choice is Emo by Elias Chatzoudis, you need a license to use his artwork. That can be purchased at PSPtubesemporium.
Scrap kit of choice is Rocker Chicks by Kittz Kreations, get it here.
1. Start by opening a new raster layer 500 x500.
2. C/P frame RC-95, re-size as needed.
3. Place tube of choice over frame. duplicate frame layer, erase any frame covering the tube's head to give the appearance that he's popping out of the frame. Add drop shadow 5 & 5.
4. C/p paper 6 as the bottom layer, erase any edges sticking out past the frame.
5. C/p RC-4 to the left and bottom of the frame.Drop shadow.
6. C/p RC-6 & RC-81 in front of guitar. Drop shadow.
7.Open RC-17, it looks like an i-pod, copy special and place to the right side of the frame. Drop shadow.
8. RC-21 backwards musical notes go behind the i-pod.
9.RC-35,26,40 go in front of the i-pod, to the bottom center of the frame. Drop shadow all 3.
10.C/p RC-14 to the top left of the frame abover guitar.
11. RC-3 stars go behind tube's head.
12. C/p paper 2 behind everything, load mask of choice
13. Add your name & copyright and you're done!
5.23.2012
Tut: Forever Love
This tutorial was written by me on May 23rd 2012, and is entirely my own work. Any resemblance to other tutorials or designs is purely coincidental. This tutorial is done in PSP x4 but may be done in other versions as well. A basic understanding of PSP and its tools are needed.
Supplies
Tube is by Barbara Jensen, you need a license to use her artwork, get it here.
FTU Scrap kit by Delicious Scraps, here
Wordart Circle frame in my supplies, here.
1. Open a new canvas 600 x 600.
2.C/P DS_Greenalicious_frame and resize.
3. Open paper_7, c/p behind frame and erase any sticking out from edges.
4.C/p flower3-2 into middle of frame.
5. Place tube of choice centered on flower.
6. C/P elements: bow flower, flower2 and flower4, place near the top of the frame.
7. C/p curled ribbon coming down from the flowers on either side. Check sample for placement.
8. C/p tag, and string at the bottom of the frame.
9. Open wordart frame from my supplies. Resize as needed around your frame.
10. Place heart2 around wordart frame to the right.
11. C/p paper8, arrange>send to bottom.
12. Load mask 046 or mask of choice.
13. Add copyright & name, your done!
5.17.2012
Tut: Fluttering By
This tutorial was written by me on May 17th 2012, and is entirely my own work. Any resemblance to other tutorials or designs is purely coincidental. This tutorial is done in PSP x4 but may be done in other versions as well. A basic understanding of PSP and its tools are needed.
Ok the tube I used for this one is a Gorjuss Sweetie by Suzanne Woolcott. Her tubes can be purchased here.
I used a FTU scrap kit by Scrapbook Giny called Yellow dream which you can find here, and the striped paper from Suzanne Woolcott's fairy scrap kit found here.
The mask I used is in my supplies found here.
Font of choice is Jandles found here.
I also used gradient glow effect.
1. Open a new raster layer 600 x 600 pixels.
2. Open the fairy scrap kit, cut & copy the striped paper on to the new canvas.
3. Load 046mask with these settings
4. Open Giny_YD_mask1, copy & paste as new layer. Resize using sample as guide.
5. Open stitched heart8, paste as new layer.
6. Paste tube of choice into the center of the heart, resize as needed. Add drop shadow if desired.
7. Paste butterfly 3 behind tube to give the illusion of butterfly wings.
8. Paste butterfly1 x 2 and place where desired. Add drop shadow.
9. Open leaves6 and place near the bottom of the stitched heart.
10. Paste leaves3 x 2 to the left side of heart and position accordingly. Add drop shadow.
11. Open flower1 place on top of leaves3 and duplicate so that you have 2 yellow flowers. Paste flower4 between the two yellow ones. Add drop shadow.
12. Type whatever words you like over the top, add drop shadow then go to effects >plugins add gradient glow.
13. Put your copyright info and your done!
Tut: Pirate's Treasure
This tutorial was written by me on May 17th 2012, and is entirely my own work. Any resemblance to other tutorials or designs is purely coincidental. This tutorial is done in PSP x4 but may be done in other versions as well. A basic understanding of PSP and its tools are needed.
Supplies
The tube used is Piracy by Suzanne Woolcott, found here,
the scrap kit is Pirates Not Allowed by Sherwood Studio found here, and
font is AquillineTwo found here.
Tutorial
1. open a new raster 700 x 700.
2. Copy & paste underlayer, resize to your liking.
3. Open frame, paste as new layer, resize to sample. Add drop shadow.
4. Cut & paste paper Bgd3, place below frame and resize so that gray edges are just visible.
5. Paste tube into frame, resize so that her pirates hat is above the frame. Add drop shadow.
6. Click on frame, duplicate, bring to top, then erase any part of the frame that is covering the hat.
7. Paste sword as new layer, resize and place at top right corner of the frame.
8. Open word art, resize to your liking and place at bottom left side of frame, add drop shadow.
9. Add your name using the font and add drop shadow.
10. Put your copyright info, and your done!
5.02.2012
Tutorial: Gorjuss Vampire
This tutorial was written by me on May 1st 2012, and is entirely my own work. Any resemblance to other tutorials or designs is purely coincidental. This tutorial is done in PSP x4 but may be done in other versions as well. A basic understanding of PSP and its tools are needed.
Supplies
I used the beautiful artwork of Suzanne Woolcott, you need a license to use her tubes, here,
and a FTU Scrap Kit called Gothic Abby by Scraps by J0es Wife, here.
Font of choice is Sverige Script found here.
No external plug-ins required.
Tutorial
Start by opening a new image 450 x 450 transparent background.
C/P String Circle Frame 1, resize to your liking.
Open up your tube and place on top of frame. Reposition as you like. Duplicate frame layer and bring to top. Erase any part of the frame that is covering the head. Now click on your tube layer and erase anything sticking out of the bottom.
C/P paper 9 behind frame, erase any edges showing out of the frame.
C/P flowers 1,2, & 3,resize and place to the left side of the frame.
C/P coffin 1, resize and position behind tube.
C/P candles, ivy 1, ivy 4, pentagram, and ribbon bow behind tube.
C/P stickpin 3 and tulips 1,2 &3 to the right of your frame.
C/P star garlnad behind tube & coffin. Resize if needed and erase edges showing from frame.
C/P paper 11 behind everything and load mask of your choice.
Add your copyright info and name, save as a PNG.
Thanks for trying my tutorial =)
Subscribe to:
Posts (Atom)
